FKM (Fluorocarbon Rubber or Fluoroelastomer) Raw material
FLUONOX® KB2450Z is a fluoroelastomer which consist of HFP and VDF. FLUONOX® KB2450Z is Bisphenol AF cure incorporated medium viscosity fluoroelastomer. This grade is specially designed for application where improved metal bonding adhesion is required, it is suitable for compression moulding. FLUONOX® KB2450Z grade is an excellent choice for making bonded seals, gaskets, hoses and tubes.
* Incorporated metal adhesion * promoter for excellent metal bonding
* Good mould release
* Lack of mould fouling
* Good hot tear resistance
Safety and Handling
Handling and processing of fluoroelastomer must be done in ventilated areas to prevent personnel exposure to
the fumes liberated during curing or use of cured rubber at high temperature. During the process, some fumes
may generate at high temperature which are harmful for human beings. Fumes should not be inhaled, eye and
skin contact must be avoided. In case of skin contact flush skin with cold water immediately. In case of eye
contact, flush with water immediately and seek medical help. Smoking tobacco or cigarettes should not be
allowed in working area. Mixing agents that contain metallic particulate such as powdered aluminum can
rapidly decompose at high temperature; therefore do not use metallic particulate as mixing agent.
Fluoroelastomer should be stored away from heat. It should be kept in clean and dry area where it can be
protected until it is used. Please read the Material Safety Data Sheet before handling the product.
FLUONOX® is the brand name of Gujarat Fluorochemicals Limited (GFL) used for its brand of fluoroelastomer. FLUONOX® can be used in
applications duly approved by GFL. Customers who plan to use the word FLUONOX® as the trade mark on or relation to their own fluoroelastomer
parts and other products in any style or combination or in any manner whatsoever must contact GFL for prior permission for such use. No
consumer/user of GFL fluoropolymer resin is permitted to claim that their products contain FLUONOX® without prior permission from GFL.
The information provided in the bulletin is furnished at no cost to the recipient and is based on information and technical data that Gujarat
Fluorochemicals Limited believes is correct and sound. Those who choose to use the information must be technically qualified, and do so entirely at
their own cost and risk. The users must determine and insure that their specific conditions of processing present no health or safety hazards. GFL
does not warranty, either expressly or impliedly in respect of use of this information for application of its FLUONOX® branded Fluoroelastomer and
shall bear no liability as a result of any loss or damage caused directly or indirectly due to use of any information provided in this bulletin. Nothing
contained herein can be taken or construed as a grant of license by GFL to operate under or a recommendation to infringe any patents.
Do not use any of FLUONOX® Fluoroelastomer in medical devices that are designed for permanent implantation in the human body. For other
medical uses, prior permission of GFL may be sought.